Signature SFDOOR4300XN Manuel D'utilisation page 37

11. Cleaning of freezer drawer partition and door tray
Cleaning of freezer drawer partition
1）Remove partition:
Pull out partition, pressing inner wall of drawer with one hand and pulling the middle partition
out with another hand.
2）Install partition:
Press partition slowly down the slot until you hear a click.
There are two slots in the drawer for your option.
（The picture above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor）
Cleaning of door tray
（The picture above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor）
Cleaning steps：
a、in order to conveniently take off tray, punch the bottom of right part of tray for several
times and again punch the bottom of left part of tray for several times, as shown in the figure;
b、 tray can be smoothly taken off after it has been loosened
-35-