Error Code; Error Description - Signature SFDOOR4300XN Manuel D'utilisation

4) Temperature setting of freezing chamber
Press temperature adjusting button of the freezing chamber
temperature of freezing chamber and then each time a press of temperature adjusting button of the
freezing chamber, the temperature will be reduced1℃;The temperature setting range for freezing
chamber is-24℃~-16℃).
When the temperature is -24℃, press the button again, and the temperature of freezing chamber will
be set at -16℃, and it circulates again and again.
5) Mode setting
Press mode button
following regulation:
Super refrigerating
vacation →none →super refrigerating
When super refrigerating mode
2 °C; Exit super refrigerating
back to temperature set before super refrigerating mode.
When super freezing mode
Exit super freezing
temperature set before super freezing mode.Time setting of super freezing:
After setting the super freezing
for 3 seconds, the display shows "48", which means that time of super freezing has been set at
48 hours. And press freezing temperature adjusting button
means that time of super freezing has been set at 6 hours.when the time arrives, it will exit the super
refrigerating mode automatically.
After setting the super refrigerating
acquiescence, and the super refrigerating mode will exit automatically when the time arrives.
When vacation mode
℃;the temperature of refrigerating chamber is turned off,and the icon(OFF) shines.
Recommended setting: refrigerated chamber 4 °, freezing chamber - 18 ℃.
6）Storage upon power failure
In case of power failure, the instant working state will be locked and maintained tiil re-electrification.
7）Opening warning and alarm control
When the refrigerator doors get open, the opening music will play. If the door is not closed in two
minutes, the buzzer will sound once every minute until the door is closed. Press any one button to stop
the buzzer alarm.
8）Fault indication
The following warnings appearing on the display indicate corresponding faults of the refrigerator.
Though the refrigerator may still have cold storage function with the following faults, the user shall
contact a maintenance specialist for maintenance, so as to ensure optimized operation of the
appliance.

Error code

E1 Temperature sensor failure
of refrigerating chamber
Temperature sensor failure
E2
of freezing chamber
E4 Failure of defrosting sensor in
refrigerating chamber
Failure of defrosting sensor in
E5
freezing chamber
to select different control mode. Control mode is cycled according to the
→super freezing
is set, temperature of refrigerating chamber will automatically set at
mode, temperature of refrigerating chamber will automatically return
is set, temperature of freezing chamber will automatically set at -24 °C;
mode, temperature of freezing chamber will automaticallyreturn back to
mode, long press the freezing temperature adjusting button
mode, The super refrigerating time setting is 2.5 hours by
is set, temperature of freezing chamber will be automatically set at -18

Error description

→super refrigerating and super freezing
.
Error code
E6
E7
EH
-28-
to change the setting
, the display shows "6", which
Error description
Communication error
Failure of ambient
temperature sensor
Failure of humidity sensor
→