General Information; Information On Environmental Protection - Orgapack OR-T 50 Mode D'emploi Et De Sécurité

2
These operating instructions are intended to simplify
familiarisation with the strapping tool and its proper
use for the intended purpose. The operating instruc-
tions contain important information concerning the
safe, proper and effi cient use of the strapping tool.
Compliance with the instructions will help to avoid
danger, reduce repairs and stoppages and increase
the reliability and service life of the strapping tool.
The operating instructions must always be available at
the place of operation of the strapping tool. They must
be read and observed by all persons concerned with
work on the strapping tool. This work specifi cally
includes operation, refi lling of operating material, fault
elimination and maintenance.
In addition to the operating instructions and the regu-
lations for accident prevention effective in the country
of use and place of application, the recognised techni-
cal regulations for safety and proper operation must
also be observed.
02.08/WE

GENERAL INFORMATION

2.1 INFORMATION ON ENVIRONMENTAL
This tool is manufactured without any physical or che-
mical substances which could be dangerous to health.
For disposal of all the parts, the governmental instruc-
tions must be observed. The electrical assemblies
should be dismantled so that the mechanical, electro-
mechanical and electronic components can be dis-
posed of separately.
ORGAPACK OR-T 50
CAUTION!
Used where there is dan-
ger to life and health.
WARNING!
Used for danger which
can cause material
damage.
NOTE!
Used for general infor-
mation and information
which, if not followed
can cause faults in the
operating sequence.
PROTECTION
Dealers provide an
environmentally-
friendly battery
disposal service
• Do not open the
battery.
• Do not throw the
used battery into hou-
sehold waste, fi re or
water.
Defective or used
batteries undergo a
complete recycling
process.
15