Hilti SFC 14-A Mode D'emploi page 17

B 18/1.6
Battery
Li­Ion
Weight 0.48 kg
(1.06 lb)
Battery
Rated voltage
Capacity
Energy content
Weight
No. of cells
5 Before use
5.1 Charging a previously used battery
Make sure that the outer surfaces of the battery are clean and dry before
inserting the battery in the corresponding charger.
Read the operating instructions for the charger for further information about
the charging procedure.
5.2 Inserting the battery
CAUTION
Before fitting the battery, check that the power tool is switched off and
that the safety lock is engaged (forward/reverse switch in the middle
position). Use only the Hilti batteries approved for use with this power
tool.
Check that the battery is securely seated in the tool.
CAUTION
A falling battery may present a risk of injury to yourself and others.
5.3 Removing the battery
5.4 Transport and storage of batteries
CAUTION
Fire hazard. Never transport batteries in loose, bulk form. There is a risk of
short circuiting.
Printed: 20.05.2015 | Doc-Nr: PUB / 5071593 / 000 / 02
B 18/2.6 B 18/2.6
Li­Ion Li­Ion
(01) (02)
0.78 kg 0.48 kg
(1.72 lb) (1.06 lb)
B 14/1.6 Li­Ion
14.4 V
1.6 Ah
23.04 Wh
0.36 kg (0.79 lb)
4
2
3
B 18/5.2
B 18/3.3
Li­Ion
Li­Ion
(01)
0.78 kg 0.78 kg
(1.72 lb) (1.72 lb)
B 14/3.3 Li­Ion
14.4 V
3.3 Ah
47.52 Wh
0.60 kg (1.32 lb)
8
en
11