Hilti SFC 14-A Mode D'emploi page 14

c) Do not disassemble, squash or incinerate batteries and do not
subject them to temperatures over 80°C (176°F). This presents a risk
of fire, explosion or injury through contact with caustic substances.
d) Avoid ingress of moisture. Ingress of moisture may cause a short
circuit, resulting in burning injuries or fire.
e) Observe the special guidelines applicable to the transport, storage
en
and use of Li-ion batteries.
f) Avoid short circuiting the battery terminals. Before inserting the
battery in the tool, make sure that the battery terminals and the
terminals in the tool are free from foreign objects. Short circuiting the
battery terminals presents a risk of fire, explosion and chemical burns.
g) Do not charge or continue to use damaged batteries (e.g. batteries
with cracks, broken parts, bent or pushed-in and/or pulled-out
contacts).
h) If the battery is too hot to touch it may be defective. Place the tool in
a location where it can be kept under observation, well away from
flammable materials, and allow it to cool down. Contact Hilti Service
after the battery has cooled down.
2.3.4 Electrical safety
Before beginning work, check the working area (e.g. using a metal
detector) to ensure that no concealed electric cables or gas and water
pipes are present. External metal parts of the power tool may become live,
for example, when an electric cable is damaged accidentally. This presents
a serious risk of electric shock.
2.3.5 Personal protective equipment
The user and any other persons in the vicinity must wear ANSI Z87.1-
approved eye protection, a hard hat, ear protection, protective gloves
and breathing protection while the machine is in use.
3 Description
3.1 Use of the product as directed
The products described are hand-held cordless drill / drivers for driving and
removing screws and for drilling in steel, wood, and plastic.
Do not use the battery as a power source for other unspecified appliances.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
The power tool is designed for professional use and may be operated,
serviced and maintained only by trained, authorized personnel.
personnel must be informed of any special hazards that may be encountered.
8
Printed: 20.05.2015 | Doc-Nr: PUB / 5071593 / 000 / 02
This