Troubleshooting - Dometic DM50CD Instructions De Montage Et De Service

Troubleshooting

9 Troubleshooting
Fault
Device does not
function, Status LED
does not glow.
The device does not
cool (plug is inserted,
Status LED glows).
The Error LED flashes
once per second.
Device does not cool
sufficiently, Status LED
glows, Error LED does
not glow.
20
Possible cause
No voltage present in
the AC socket.
Power circuitry is
defective.
Defective compressor
Temperature sensor is
defective.
Defective compressor
Poor ventilation
DM50CD, DM50CF
Suggested remedy
Try using another power socket.
This can only be repaired by an
authorized service agent.
This can only be repaired by an
authorized service agent.
This can only be repaired by an
authorized service agent.
This can only be repaired by an
authorized service agent.
Check the ventilation.
Clean the filter underneath the device.
EN