Cleaning And Maintenance; Troubleshooting; General Troubleshooting - Dometic RH 418NTE Instructions De Montage Et De Service

Cleaning and maintenance

7 Cleaning and maintenance
!
WARNING! Electrocution hazard
Always disconnect the device from the power supply before you clean
and service it.
A
NOTICE! Damage hazard
• Never clean the cooling device under running water or in dish water.
• Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the cooling device.
1. Use a soft cloth, lukewarm water and a mild detergent to clean the inside of the
cooling device.
2. Wash out the cooling device using clean water and dry thoroughly.
3. At annual intervals, remove dust from the cooling aggregate at the back of the
cooling device using a brush or a soft cloth.
8

Troubleshooting

General troubleshooting

Problem
The cooling is poor.
There is no cooling.
20
Possible cause
Too much food was put
in.
Door is not closed
properly.
Internal air circulation is
restricted.
Plug is not properly
connected to the mains
socket.
There is no voltage in
the mains socket.
RH418NTE, RH418NTEG
Suggested remedy
Remove some food.
Close the door.
Provide internal air circulation.
Put the plug into the mains socket
properly.
Establish voltage.
EN