Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
•
Some parts of the product are small in size and may
cause Choke Hazards, if swallowed by Children or any
individuals who have a tendency to place inedible
objects in their mouths.
Inspection and repairs
•
Before use, check the appliance for damaged or
defective parts. Check for breakage of parts, damage to
switches and any other conditions that may affect its
operation.
•
Do not use the appliance if any part is damaged or
defective.
•
Have any damaged or defective parts repaired or
replaced by an authorised repair agent.
•
Before use, check the power supply cord for signs of
damage, ageing and wear.
•
Do not use the appliance if the power supply cord or
mains plug is damaged or defective.
•
If the power supply cord or mains plug is damaged or
defective it must be repaired by an authorised repair
agent in order to avoid a hazard.
Do not cut the power supply cord and do not attempt to
repair it yourself.
•
Never attempt to remove or replace any parts other than
those specified in this manual.
Before first use
•
Remove all packaging from the appliance.
•
Clean the appliance before first use.
•
Check that all parts are complete and not damaged.
Warning! The blades are sharp, handle with great care and
ensure that you unplug the appliance from power outlet
before assembling and removing parts.
Symbols on appliance
The following symbol is shown on the appliance.
Warning! Sharp blades, keep fingers out of
moving parts.
Features
1. Filler cup
2. Blender jar cover
3. Blender jar
4. Blender jar gasket
5. Blender jar blade base
6. Motor base
7. Control knob
8. Anti-slip feet
9. Grinder mill
10. Grinder mill gasket
11. Grinder mill blade base
4
(Original instructions)
How to use the Blender
After unpacking, disassemble unit before using first time.
Wash all parts except motor base in warm, soapy water.
Rinse and dry immediately.
Work for 1 minute and leave an interval of 1 minute
1. Wash the foods (fruits, vegetables, etc.) that will be
blended( peel skin or remove pits when necessary).
Cut them into small pieces to fit for blending.
2. Put the sliced foods into the transparent plastic jar and
put on the top cover. Each time of blending, do not put
more than half of the cup scale (approx.0.5 liter) of food
in it. Small quantity is not preferable either.
Proper quantity of water should be added during
blending.
3. Plug on the power supply making sure the speed is at '0'
and then adjust the switch to speed 1 ( low speed) or
speed 2 (high speed) position, the blender begins
working. It only takes 1 minute to finish the blending
progress. Then adjust the switch to "0" position to turn it
off, detach the blender and pour out blended food (Fig 1).
4. The blender will also operate when the switch is held on
"Pulse" position. When the switch is loosened, it will
return to "0" position and shut down automatically. This
function is designed for short-time blending(a few
seconds), which makes it easy to control the blending
time and for short time using.
Blending guide
Processing
Food
Suggested
Task
Setting
Aerating
Milkshakes,
2, Pulse
smoothies
Watery
batters,
Mixing
1, 2, Pulse
watery cakes
Soups,
vegetables,
2, Pulse
fruits,
Pureeing
carrots
Figure 1
Suggested Processing
Procedure
Use chilled milk. Blend it until
desired consistency is achieved.
The maximum contents: 400gram.
The maximum operating time: 30
seconds.
Process ingredients until
just combined. DO NOT OVER
PROCESS.
The maximum contents: 700gram.
The maximum operating time: 60
seconds.
Blend until smooth.
The maximum contents: 800gram.
(The proportion of ingredients to
water is 2:3.)
The maximum operating time: 60
seconds.
Publicité
