Publicité
Les langues disponibles
Les langues disponibles
ATTENTION! Times for processing will vary with the quantity
in the Jar, these times are only a guide.
How to use the Grinder
Work for 15 seconds and leave an Interval of 5 seconds.
Figure 2
1. Such as beans, rice, peanuts and coffee beans, etc. dry
foods that able to be grinded into powder.
2. Put foods into the dry mill and lock it onto the motor
base. Do not add in water when milling.
3. Plug on the power supply making sure the speed is at '0'
and then adjust the switch to speed 1 or speed 2
position.
Thus the foods can be grinded into powder very soon.
Adjust the switch back on "0' position to turn it off. Then
remove the dry mill and pour out the powder that have
been processed.
4. The dry mill also can operate when the switch is held on
"Pulse" position. When the switch is loosened, it will
return to "0" position and shut off automatically. This
function is designed for short time dry milling, which
makes it easy to control for few seconds working.
Note:
The quantity of the coffee beans should not exceed
the max mark on the grinder mill.
Tips for blending
•
A brief whirl in the blender will rescue a lumpy gravy, or
an eggs-based sauce that has separated.
•
Food items for blending should be cut into cubes
(approximately 2-3cm), this will assist in achieving an
even result.
•
To ensure efficient mixing when blending dry mixtures, it
may be necessary to stop the blender and push
ingredients down the sides of the jar with a spatula (not
included).
•
When pureeing fruit or vegetable, cooked or raw, cut into
small pieces to facilitate blending.
•
When blending a variety of ingredients together, blend
the liquids, first, then add dry ingredients.
•
Always ensure stones are removed from fruit and bones
from meat as these can harm the blades.
•
Do not process hot liquids in your blender. Allow it to
cool before processing.
(Original instructions)
Always ventilate the jar when pureeing warm ingredients.
This is achieved by lifting the filler cup out of the lid, after
starting the blender.
After use
•
Switch off, remove the plug from the socket and let the
appliance cool down before leaving it unattended and
before changing, cleaning or inspecting any parts of the
Figure 3
appliance.
•
When not in use, the appliance should be stored in a dry
place. Children should not have access to stored
appliances.
Cleaning
Caution: Please wait till all the components stop running
before disassemble. Be carefully when dissembling or
cleaning, as the blade is very sharp.
1. First unplug, disassemble the grinding cup from the
Base. Remove the Blender jar from the motor base and
remove the removable parts.
2. Rinse the above parts under water tap or put them in
warm water added with detergent for cleaning.
3. Let all parts dry thoroughly after cleaning.
Note: Motor unit, blender jar cover, filler cup, blender jar,
blender jar blade base, grinder mill and grinder mill blade
base are NOT dishwasher safe.
To clean the motor base
Use a damp, soft sponge with detergent and wipe over the
motor base.
Note: Never immerse the appliance, cord set or plug in
liquids.
•
When not in use, the appliance should be stored in a dry
place. Children should not have access to stored
appliances.
Maintenance
1. The product should be used frequently to keep the
motor dry.
2. If the unit is not for use in a long time, please put it in dry
and ventilated places for storage to prevent the motor
from getting rotten due to damp.
ENGLISH
Figure 4
Figure 5
5
Publicité
