Setting the clock
You must set the clock before you can program the ON/OFF timer.
To set the clock: (Example: 8:30 AM)
1. Press MENU, then press
2. Press ▲ or ▼ to highlight ON/OFF TIMER.
CH
PICTURE AUDIO SETUP
LANGUAGE
ENGLISH
CH LABEL
START
FAVORITE CH
START
V-CHIP
START
LOCK
START
ON/OFF TIMER
ON
COLORSTREAM
DVD
IMAGE TILT
SELECT
SET
ENTER
3. Press
or
to highlight SET, then press ENTER. The ON/OFF
TIMER menu appears.
4. Press ▲ or ▼ to highlight CLOCK, then press
the hour position.
CH
PICTURE AUDIO SETUP
ON/OFF TIMER
CLOCK
12:00 AM
ON TIMER
12:00 AM
CH 001
OFF TIMER
12:00 AM
SELECT
ADJUST
END
EXIT
5. Press ▲ or ▼ to set the hour, then press
position.
CH
PICTURE AUDIO SETUP
ON/OFF TIMER
CLOCK
ON TIMER
12:00 AM
CH 001
OFF TIMER
12:00 AM
SELECT
ADJUST
END
EXIT
6. Press ▲ or ▼ to set the minutes, then press EXIT to return to
normal viewing.
Setting the ON/OFF timer
Setting the on timer
This feature allows you to program the TV to turn on automatically at a
set time. If you program the ON TIMER to "DAILY," the TV will turn on
every day at the same time to the same channel until you clear the ON
TIMER.
To set the on timer: (Example: Turning on the TV to channel 12 at
7:00 AM, DAILY)
1. Press MENU, then press
2. Press ▲ or ▼ to highlight ON/OFF TIMER.
3. Press
or
to highlight SET, then press ENTER. The ON/OFF
TIMER menu appears.
4. Press ▲ or ▼ to highlight ON TIMER and press
the hour position.
CH
PICTURE AUDIO SETUP
ON/OFF TIMER
CLOCK
8:30 AM
ON TIMER
12:00 AM
CH 001
OFF TIMER
12:00 AM
SELECT
ADJUST
END
EXIT
3N11601A/E P18-30
26
or
to display the OPTION menu.
MODE
OPTION
OFF SET
0
START
MODE
OPTION
CLEAR
CLEAR
to highlight the minute
MODE
OPTION
8:30 AM
CLEAR
CLEAR
or
to display the OPTION menu.
MODE
OPTION
CLEAR
CLEAR
or
to highlight
Note:
If the power source for the TV is interrupted
(for example, the power cord is unplugged or
a power failure occurs), you will need to reset
the clock.
or
to highlight
Note:
After a power failure or disconnection of the
power, the timer settings will be lost.
26
1/19/04, 6:02 PM
Menu/
Enter
Exit
Menu/
Enter
Exit