Publicité
Les langues disponibles
Les langues disponibles
3.
PRODUCT OVERVIEW
INTRODUCTION
This document contains information on how to set up and connect the SAM-1A gateway in a PLC or automated network.
The Smart Automation Module (SAM-1A) is a communication tool between compatible GYS welding power sources and programmable
logic controllers (PLCs).
A SAM-1A connection converts GYS devices' internal communication language into digital or analogue input/output signals.
The settings can be changed by using pre-loaded JOBs saved in the power source.
The power source/SAM-1A module assembly can be reassigned to a new system without requiring any modifications to the system
(integrating it into a new machine, replacing a PLC or automating a process, etc.).
INTRODUCTION
The SAM-1A (PN. 071940) enables additional applications on compatible power sources.
The module allows access to parameters of the welding generator for control by the PLC or robot.
The following products are compatible:
Welding process
MIG/MAG
TIG
CONTENTS / SPARE PARTS
Electronic board
E0101C
Electronic board support brackets:
NEOPULSE 320 C / 400 CW
PULSEMIG 320 C / 400 CW
NEOPULSE 400 G / 500 G
PULSEMIG 400 G / 500 G
20
Name
NEOPULSE 320 C
PULSEMIG 320 C
NEOPULSE 400 CW
PULSEMIG 400 CW
NEOPULSE 400 G
PULSEMIG 400 G
NEOPULSE 500 G
PULSEMIG 500 G
TITAN 400 DC
TITANIUM 400 AC/DC
IMS TITANIUM 400 AC/DC
Cable bundle 300 mm
F0035
98129
K0539Z
SAM-1A
Part Number
062474
062641
062061
062658
014497
062665
014503
062672
013520
013568
037830
RJ45 cables
300 mm
750 mm
21574
21575
Connector support plates:
NEOPULSE 320 C / 400 CW
PULSEMIG 320 C / 400 CW
EXAGON 400 FLEX
GENIUS 400 FLEX
NEOPULSE 400 G / 500 G
PULSEMIG 400 G / 500 G
Connectors
20 points
4 points
63851
53115
EN
K0535GF
K0536GF4
Publicité
