Toparc SAM-1A Manuel D'utilisation page 19

1. GENERAL INFORMATION
REVIEW
Review Date
1.0 01/04/2022
2.0 27/02/2023
2. WARNINGS - SAFETY REGULATIONS
GENERAL ADVICE
This user's manual contains information on the operation of the device and the precautions to be taken for
the safety of the user.
Please read it carefully before using the machine for the first time and keep it for future reference.
These instructions must be read and understood before any operation.
Any modification or maintenance not specified in the manual must not be undertaken.
The manufacturer shall not be liable for any damage to persons or property arising from use not in
accordance with the instructions in this manual.
If you have any problems or uncertainties, please consult a qualified person to handle the appliance correctly.
This device may only be used for ticket printing and/or data transmission within the limits indicated on the
device and in the manual. The safety instructions must be observed. In case of improper or dangerous use,
the manufacturer cannot be held responsible.
The device is intended for indoor use. It should not be exposed to rain.
Regulation :
The device complies with the European directives. The declaration of conformity is available on our website
(see cover page).
Material conforms to UK requirements. The UK Declaration of Conformity is available on our website (see
cover page).
This material is subject to separate collection in accordance with the European Directive 2012/19/EU. Do not
dispose of in domestic waste!
A recyclable product that is subject to sorting instructions.
ELECTRICAL SAFETY
When working on the product, be sure to secure the area by not allowing anyone who is not familiar with the safety instructions in
this user manual to enter the area. This device should preferably be installed by a professional according to the installation rules in
force in the particular country. If this is not possible, it is recommended that you read these rules before proceeding.
ELECTROSTATIC DAMAGE WARNING
Static electricity can damage electronic equipment. Use an earthed, antistatic wrist strap, ankle strap or equivalent
safety device to prevent electrostatic discharges (ESD) when installing this product.
Electrostatic damage can irreparably impair the power source and/or the entire product. To protect electronic components from
electrostatic damage, place this product on an antistatic surface, such as an antistatic discharge mat, antistatic bag or disposable
antistatic mat.
SAM-1A
Modification SAM firmware version
Design 1.0
Modification
1.0
EN
19