Télécharger Imprimer la page

Broan BNDD1 Serie Manuel D'installation, D'utilisation Et D'entretien page 14

Publicité

Les langues disponibles

Les langues disponibles

FRAMELESS CABINET
14
Refer to the marking on brackets to determine the correct installation side and orientation.
3 X
7/64"

Align the corresponding bracket to the cabinet side, while placing rear end of bracket
against the wall. Draw a line on the outer edge of the bracket (as shown).

Slide the bracket towards the center of cabinet and align the outside edge of the
bracket with the marked line, keeping the rear end edge leaning on the wall.
Use a pencil to mark 3 holes.

Remove the bracket. Using a 7/64" drill bit, drill 3 holes where marked.

Assemble the bracket to the cabinet bottom using a Phillips screwdriver and 3 provided
countersunk wood screws. Repeat for the other cabinet side.

Publicité

loading

Ce manuel est également adapté pour:

Bndd130ssBndd130wwBndd124ssBndd124ww