Seca 634 Mode D'emploi Et Garantie page 79

Calculating and printing
out BMI automatically
Switching off the scale
If you use this scale together with a wireless printer and
a length measuring rod from the
system, you can have BMI calculated and printed out
automatically.
NOTE
The prerequisite for this function is that the
devices are registered together in one wireless
group (see "The seca 360° wireless network"
on page 86).
1. Perform the height measurement.
2. Briefly press the Enter key (send/print) of the
length measuring rod.
The measured value is sent to the wireless printer
but not printed.
3. Perform the weighing operation.
4. Press and hold the Enter key (send/print) of the
scale.
The measured value is sent to the wireless printer.
BMI is calculated.
Height, weight and BMI are printed out.
Press the Start key.
NOTE
In battery mode, the scales will switch off auto-
matically after 5 minutes if no load is placed on
them.
English
seca 360° wireless
Operation • 79