SCANGRIP NOVA-EX R Mode D'emploi page 3

Luminous Flux:
Working Time:
CRI (Ra):
CCT:
IPXX:
Operation Temperature(°C):
Storage Temperature(°C):
Product Dimension:
Product Weight:
3. Usage and Application Scope
NOVA-EX R 03.5618 of Rechargeable Work Light (abbre.Explosion-proof in the following instruction) is suitable
for using in explosive area of Zone 1, Zone 2, Zone 21, Zone 22, gas group IIA/IIB/IIC, dust group IIIA/IIIB/IIIC and
Temperature Group T1~T6/T85°C. It is suitable for using in temporary local auxiliary lighting and local main lighting
for the industries of petroleum produce, smelting, chemical, pharmaceutical, brewing, military reserve, etc.
4. STRUCTURE
• Explosion-proof cavity which includes the light source gluing contact surface cannot be repaired if any damage or
crack happens.
• The threads of explosion-proof cavity for the switch part cannot be repaired if any damage or crack happens.
• The cylinder part of explosion-proof cavity for the switch part cannot be repaired if any damage or crack happens.
5. INSTRUCTION
• Before use, please check whether the packing is in good condition, if there is any visible damage of the light and
charger. For the flood light, please check if there is any visible damage of the structure or "abnormal sound" inside.
Please open the light to check if the damage will influence the explosion-proof performance and make appropriate
treatment.
• Please check if the explosion-proof light nameplate parameters listed are conformed to the actual conditions of
use.
• The explosion-proof light is with angle adjusting function from 0° - 180° to meet a variety of angle lighting orien-
tation.
• The power part is cast sealed. Stop use the light when the cast sealing material turn soft, crack and expand.
• The explosion-proof light is with switch mode Dim-Middle-High-OFF. Press once "Dim", twice "Middle", third "High",
forth "OFF". The corresponding working time is 4.3h, 2.15h.
• Please charge the light under the circumstance between 0° C to +45° C. When charge the battery, the two pair
of joints are provided with anti-reverse connection positioning slots. Please open the protective cover, insert
the charging connector to the charging base and screw the butt cap tightly. Please pay attention to the charging
orders: firstly make sure the reliable connection between the charging base and joint. Then plug the charger to AC
power supply. The conversed operation is prohibited.
• The explosion-proof light is with the function of battery capacity indicating. When charging, the battery indicator
is "red". When it turns "green", the charging is finished and please disconnect the AC power supply.
• The following operations are prohibited in any possible dangerous area:
Open the light when it is working or turning off the load.
Regular or occasional maintenance and repair.
• The persons who use the light at site should know about the performance of explosion-proof light. Turn off the
light in time and evacuate the dangerous area when find any abnormal phenomenon. Unqualified repair person is
not allowed to repair the explosion-proof lights.
6. MAINTENANCE
• The service man must have on-the-job training to know the specification and operating performance of
explosion-proof light. They must have professional knowledge and should familiar with the structure of
explosion-proof light.
• Clean the dust and dirt on the shell of the explosion-proof light regularly to improve the luminous efficacy and
heat dispersion performance. A wet cloth can be used for cleaning.
• Check whether the transparent parts have been impacted by foreign body regularly. Check whether the fasteners
and inner components are loose, soldering off or corroded. If yes, do not use it until maintained.
• If use the light in damp environment, please regularly check and change the sealing components to ensure the
protective performance of the shell.
• When disassemble the light, must comply with the warning requirements to operate in non-dangerous area.
High 4000lm
High 2.15h
>90
6000K
IP65
-20°C~+45°C
-20°C~+45°C
L270*W261*H130mm
4.3Kg