Safety Precautions; Setting Up The Weighing Platform; Selecting The Site Of Installation - Mettler Toledo PBA220 Mode D'emploi

1 Safety precautions

Product safety plays an important role at METTLER TOLEDO.
Non-observance of the following instructions can lead to damage to the weighing platform
and/or injuries.
▲ Before using the weighing platform read these instructions. Store these instructions for
future use.
▲ Take care when transporting or lifting heavy devices.
▲ Only qualified personnel may install and maintain the weighing platform.
▲ Disconnect the weighing terminal from the power supply before carrying out cleaning,
installation and maintenance.
▲ The weighing platform must have stabilized to room temperature before the supply voltage
is switched on.
▲ Do not use the weighing platform in hazardous environments.

2 Setting up the weighing platform

2.1 Selecting the site of installation

▲ The surface must be able to bear the
weighing platform under maximum load
at the points of support. At the same time
it should be so stable that no vibrations
arise during weighing. This is also to be
observed when installing the weighing
platform in
systems.
▲ If possible, vibrations from neighboring
machines should not occur at the site of
installation.
4
conveyor and similar