Appendix - Mettler Toledo PBA220 Mode D'emploi

6 Appendix

6.1 Notice for verified weighing instruments in EC countries
Weighing instruments verified at the place of manufacture bear the preceding
M
mark on the packing label and a green "M" sticker on the descriptive plate. They
may be set to work immediately.
Weighing instruments which are verified in two steps have no green "M" on the
M
descriptive plate and bear the preceding identification mark on the packing label.
The second step of the verification must be carried out by the approved METTLER
TOLEDO service or by the W & M authorities. Please contact your METTLER
TOLEDO organization. The first step of the verification has been carried out at the
manufacturing plant. It comprises all tests according to EN45501-8.2.2.
If national regulations in individual countries limit the period of validity of the certification, the
operator of such a scale is himself responsible for its timley re-certification.
6.2 Disposal
In conformance with the European Directive 2002/96/ EC on Waste Electrical and
Electronic Equipment (WEEE) this device may not be disposed of in domestic
waste.
This also applies to countries outside the EU, per their specific requirements.
➜ Please dispose of this product in accordance with local regulations at the
collecting point specified for electrical and electronic equipment.
If you have any questions, please contact the responsible authority or the
distributor from which you purchased this device.
Should this device be passed on to other parties (for private or professional use),
the content of this regulation must also be related.
Thank you for your contribution to environmental protection.
11