SilverCrest SDI 3500 A1 Mode D'emploi page 52

Child safety lock
To prevent unauthorised switching on or setting modification, for instance by
children, this appliance is fitted with a child safety lock.
NOTE
► It does not matter whether you activate the child safety lock using the but-
tons "+"
except the "ON/OFF" button
NOTE
► You can also the child safety lock as a safe-wipe function:
Before you wipe the buttons with a damp cloth, activate the child safety
lock. This helps avoid any inadvertent activation of buttons.
When the appliance is in operation:
■ Press the "+"
with the set power level/temperature, will show on the display
Now all buttons, including the "ON/OFF" button
■ If a single hob
"Loc" (LOCK), alternating with the set power level/temperature. "Loc" is
permanently shown on the display
operation.
■ To deactivate the child safety lock, press the "+"
together. The buttons can now be activated again.
When the appliance is switched off:
■ Press the "ON/OFF" button
■ Press the "+"
on the display
are locked. After 10 seconds, the appliance will switch itself off.
■ If you press the "ON/OFF" button
ance on, the display shows
deactivate the child safety lock, press the "+"
again together. The buttons can now be activated again.
When the timer is in operation:
■ Press the "+"
with the current timer time, will show on the display
■ To deactivate the child safety lock, press the "+"
again together. The buttons can now be activated again.
SDI 3500 A1
and "-" or using the buttons "+"
, are always locked.
/ and "-" / buttons together. "Loc" (LOCK), alternating
/ is activated, the respective display
to switch on the appliance.
/ and "-" /
/ . Now, all buttons, except the "ON/OFF" button
/ "Loc", and the buttons remain locked. To
/ and "-" / buttons together. "Loc" (LOCK), alternating
and "-"
are locked.
/ of the hob /
/ and "-"
buttons together. "Loc" (LOCK) appears
again in order to switch the appli-
/ and "-"
/ .
/ and "-"
. All buttons,
/ .
/ shows
that is not in
/ buttons
/ buttons
/ buttons
49
GB