Step 4: Determine Proper Dryer
The direction of the arrow indicates which dryer is
being used.
Figure 33
Step 5: Set Fabric Selector
Select NORMAL for cottons, PERM PRESS for
permanent press, DELICATE for sensitive items or
FLUFF (NO HEAT) for items that require no heat.
NOTE: Always follow manufacturer's care label
instructions.
Figure 34
512686
DRY2140N
DRY2100N
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Step 6: Start Dryer
Nonmetered Models
Rotate timer knob to desired time setting (up to
60 minutes). Press the PUSH-TO-START button.
IN USE light will come on (indicating start of cycle).
NONMETERED MODELS
Figure 35
Coin Slide Models
Place coin(s) in slide and carefully push in as far as
possible and then pull slide out as far as possible. After
IN USE light comes on (indicating start of cycle),
press the PUSH-TO-START button.
METERED MODELS
Figure 36
Remove knits when slightly damp because overdrying
may cause shrinkage. Do not tumble dry knit woolens.
Should dryer stop before cycle is completed, the motor
overload protector may have cycled. Refer to
Maintenance section.
NOTE: This machine includes an extended tumble
feature. Starting 20 minutes after a cycle ends, the
cylinder will tumble for two minutes every hour
without heat, up to 18 hours or until door is
opened.
Operation
DRY2101N
W297I
D363I
31