Publicité
Les langues disponibles
Les langues disponibles
82 electrolux
– The digital display shows only one hor-
izontal bar. It remains for all the dura-
tion of the washing programme.
When the washing programme oper-
ates, you cannot change the pro-
gramme. Cancel the washing pro-
gramme.
Warning! Only interrupt or cancel a
washing programme if necessary.
Caution! Open the door carefully. Hot
steam can come free.
Interrupting a washing programme
Open the door.
• The programme stops.
Close the door.
• The programme continues from the point
of interruption.
Cancelling a washing programme
1. Press and hold function buttons B and C
until:
– All the programme lights come on.
– The digital display shows three hori-
zontal bars.
2. Release function buttons B and C. The
washing programme is cancelled.
At this time you can do these steps:
1. Switch off the appliance.
2. Set a new washing programme .
Fill the detergent dispenser with detergent
before you set a new washing programme.
Setting and starting a washing
programme with delay start
1. Switch on the appliance.
2. Make sure that the appliance is in setting
mode.
3. Set a washing programme.
4. Press the delay start button until the dis-
play shows on flashing the necessary de-
lay start of the washing programme.
– The delay start indicator light comes
on.
5. Close the door.
– The countdown of the delay start
starts.
All manuals and user guides at all-guides.com
– The countdown of the delay start de-
creases with steps of 1 hour.
– When the countdown is completed,
the washing programme starts auto-
matically.
Do not open the door during the count-
down to prevent interruption of the
countdown. When you close the door
again, the countdown continues from
the point of interruption.
Cancelling a delay start
1. Press and hold function buttons B and C
until:
– All the programme lights come on.
– The digital display shows three hori-
zontal bars.
When you cancel a delay start, you also
cancel the washing programme.
2. Set a new washing programme.
End of the washing programme
• The appliance stops automatically.
• The audible signals for the end of the pro-
gramme operate.
1. Open the door.
– The digital display goes off.
– The end-of-programme indicator light
comes on.
– The indicator light for the completed
programme stays on.
2. Switch off the appliance.
3. For better drying results, keep the door
ajar for some minutes before you remove
the dishes.
Let the dishes cool down before you remove
them from the appliance. Hot dishes are
easily damaged.
Removing the load
• First remove items from the lower basket,
then from the upper basket.
• There can be water on the sides and door
of the appliance. Stainless steel becomes
cool more quickly than the dishes.
Publicité
