Installation
• Make sure that the appliance is not dam-
aged because of transport. Do not con-
nect a damaged appliance. If necessary,
contact the supplier.
• Remove all packaging before first use.
• A qualified and competent person must do
the electrical installation.
• A qualified and competent person must do
the plumbing installation.
• Do not change the specifications or modify
this product. Risk of injury and damage to
the appliance.
• Do not use the appliance:
Product description
1
Ceiling spray arm
2
Upper basket
3
Upper spray arm
4
Filters
5
Lower spray arm
6
Detergent dispenser
7
Rinse aid dispenser
8
Rating plate
9
Salt container
All manuals and user guides at all-guides.com
– if the mains cable or water hoses are
damaged,
– if the control panel, worktop or plinth
area are damaged, that you can get ac-
cess to the inner side of the appliance.
Contact your local Service Force Centre.
• Do not drill into the sides of the appliance
to prevent damage to hydraulic and elec-
trical components.
Warning! Carefully obey the
instructions for electrical and water
connections.
Optical signal
After the start of the washing programme, an
optical signal shows on the floor below the
appliance door.
If the appliance is installed higher with a flush
kitchen furniture door, the optical signal will
not be visible.
electrolux 71