Publicité
Les langues disponibles
Les langues disponibles
76 electrolux
– Increase the dosage if there are water
droplets or limescale on the dishes.
Loading cutlery and dishes
Helpful hints and tips
Caution! Only use the appliance for
household utensils that are applicable
for dishwashers.
Do not use the appliance to clean objects
that can absorb water (sponges, household
cloths, etc.).
• Before you load cutlery and dishes, do
these steps:
– Remove all food remainings and debris.
– Make burnt, remaining food in pans soft.
• While you load cutlery and dishes, do
these steps:
– Load hollow items (e.g. cups, glasses
and pans) with the opening down.
– Make sure that water does not collect in
the container or in a deep base.
– Make sure that cutlery and dishes do not
lie inside one another.
– Make sure that cutlery and dishes do not
cover other cutlery and dishes.
– Make sure that glasses do not touch
other glasses.
– Put small objects in the cutlery basket.
• Plastic items and pans with non-stick
coatings can keep water droplets. Plastic
items do not dry as well as porcelain and
steel items.
• Put light items in the upper basket. Make
sure that the items do not move.
Caution! Make sure that the spray arms
can move freely before you start a
washing programme.
Warning! Always close the door after
you load or unload the appliance. An
open door can be dangerous.
Lower basket
Put saucepans, lids, plates, salad bowls and
cutlery in the lower basket. Put service dishes
in the front part of the basket.
All manuals and user guides at all-guides.com
– Decrease the dosage if there are
streaks, whitish stains or bluish layers
on the dishes.
The rows of prongs in the rear part of the
basket can be flat to load pots, pans, bowls
and deep dishes.
1. Hold the two rows of prongs on the right
side at the rear part of the basket.
2. Lift the rows of prongs out of the guides.
3. Fold the rows of prongs in.
1. Hold the two rows of prongs on the left
side at the rear part of the basket.
2. Lift the rows of prongs out of the guides.
3. Fold the rows of prongs in.
Publicité
