Leelbox BQH2800II Manuel D'exploitation page 30

Add oil
a.Place the engine on a level
Surface.
b.Remove the Right cover
c.Remove the dipstick and
Dipstick
d.Add recommended oil to the
upper limit.
Upper limit
Lower limit
e.Fully tighten the dipstick.
CAUTION
oil level check
Insert the dipstick into filler
port and stay at the filler neck.
Do not screw the dipstick into
the port,then remove the
dipstick and check the oil
level.
f.Dispose of used oil at an
approved waste management
facility.
Change oil
CAUTION
Change oil
when the engine
is warm from operation.The
oil temperature can reach up
to 140°℃ in the warm state,
and careful operation should
be taken when changing the
oil to prevent burns.
a.Place the machine on a level
surface which is 300mm higher
than the ground.
b.Remove the Right cover
27