Publicité
Les langues disponibles
Les langues disponibles
Grounding terminal
The grounding terminal is
designed to prevent electric
shock by connecting it to
the grounding wire.The
generating set must be properly
grounded before operation.
Transfer switch
(CHOKE&RUN&OFF&STOP)
Note:One-button start and
remote control start,no function
of manually close for the choke.
Choke:Close the choke.
Note:Turn to choke position to
start when engine is cold,and
turn to Run position to start
when engine is hot.
Run:The generating set
operates normally.
OFF:Fuel off without stop.
This position can run out of the
remaining fuel and improve the
reliability of the generating set.
Note:If you do not plan to use
the generator in the near future,
please use this function,or
drain the fuel inside the
carburetor through the
carburetor drain bolt.
Stop:The stop position of the
generator.
Note:After the generating set is
unloaded,please run for 3
minutes at no load to stabilize
the temperature,then stop the
generating set.
Push-button start
（If applicable)
You can start the generator by
pressing the button with your
finger.
9
Publicité
