Leelbox BQH2800II Manuel D'exploitation page 22

Wireless remote control
（If applicable)
Lndicator
Light
Start
Operating
1.Turn on the remote control
switch.
2.Press the START button and
hold for more than 0.3s for
startup.
NOTE：Sometimes the generator
can take a few attempts to start
in cold weather.If machine does
not start in the first 10 seconds,
wait for 30 seconds before
attempting again.
If the motor turns a little then
stops when you press the Start
button,it may indicate a low
battery.Charge the battery before
operation or start by recoil start.
Stop
19
When electrical device requires
a large starting current,please
put the energy-saving switch in
the"OFF"position;When the
starting current required by
electrical device is small,put
the energy-saving switch in the
"ON"position.
After completing the operations
above,the generator can be
connected to electrical devices.
WARNING
It is prohibited to start or
close the generating set
when the output terminal of
generating set is connected
to an electric device and the
electric device is in "ON"
state.