4
Turn the ECO switch to "ON"
position.Please turn the ECO
switch to "OFF"position when
large starting curent needed.
5Manual start
WARNING
Check starter cord conditions
before operating.Have it
replaced immediately by
local authorized dealer if cord
is frayed.
1.When starting engine,grasp
the recoil starter handle and pull
slowly until resistance is felt.
Then pull rapidly to avoid
kickback.When pulling the
recoil starter,Firmly grasp the
generator to avoid tumble of
generator or personal injury
Caused by tumble.
WARNING
KICKBACK
Rapid retraction of the starter
cord will pull hand and arm
towards the engine faster
than you can let go.
Unintentional startup can
result in entanglement,
traumatic amputation or
laceration.Broken bones,
fractures,bruises or sprains
could result.
2.Turn the Transfer switch to
"RUN"position.
6electric starting
(Model used)
Cold hot engine start(electric
start):Turn the combination
switch to "Run"position.
Press the engine switch and
release it after the engine starts.
17