Leelbox BQH2800II Manuel D'exploitation page 19

For remote grounding,connect
of A ground terminal has been
provided on the generating set.
For remote grounding,a copper
wire that is no small than(4mm2)
should be used between the
generator ground terminal and
the ground.
The grounding requirements
varies from different regions,so
we strongly recommend your to
consult a qualified dealer in
your area.We strongly
recommend that you consult
with a qualified electrician for
grounding requirements in your
area.
2.Starting the generating set
1
Perform operating checklist
and remove all loads.
2（Applicable types)
Turn the ventilation knob of fuel
cap to the "ON"position to
ensure fuel flow.
Note:You don't need to follow
this step,if your generator has
no carbon cannister.
3（Suitable for hand start)
Cold start
Turn the combination switch to
"CHOKE"position to shut off the
choke.
Warm start
Turn the combination switch to
"RUN"position,if not started,
please turn the combination
switch to "CHOKE"position
before restarting.
16