Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Press key
Press key
• VIDEO CALL MODE
You can initiate a video call to an external unit.
When video call mode is set, the monitor called by the switchboard switches on and permits e.g. viewing of separate video cameras linked
to 1259/A or 1259C. (see FT/SB/13 or FT/SBC/05)
VIDEO mode can be configured as permanent or as single call.
OPERATION
Starting condition:
standby.
Press the "A/V" key to enable video calling.
Video call mode must be set in advance as described below.
OPERATION
Starting condition:
standby.
Press the MENU key.
Use the ▼ ▲ keys to select the desired menu.
Press key
8
TUV
to select the desired option
(VIDEO MODE CONFIGURATION)
Press
1
to activate video mode permanently after enabling it
with the A/V key.
Or
Press
2
ABC
to activate video mode only for the next call after
enabling it with the A/V key.
All manuals and user guides at all-guides.com
DISPLAY
CALL FOR USER 002
A
(----) 21:40
WED 12/03/07
If the switchboard is in audio connection with the external unit.
COMMUNICATING
TO EXTERNAL UNIT
DISPLAY
A
(----) 21:40
WED 12/03/07
V
(——) 21:40
WED 12/03/07
DISPLAY
A
(----) 21:40
WED 12/03/07
1-CHANGE TIME
2-CHANGE DATE
8- VIDEO MODE
CONFIGURATION
1- PERMANENT
2- SINGLE CALL
1- PERMANENT
2- SINGLE CALL
MT SB 01
DESCRIPTION
The switchboard rings.
If there is a name in the directory under code
002, that name is displayed.
If door opening is carried out some
confirmation tones will be heard.
The call is cancelled.
If door opening is carried out some
confirmation tones will be heard.
The communication ends after 10 seconds.
DESCRIPTION
DESCRIPTION
The switchboard remains in video mode until
disabled by pressing the "A/V" key
The switchboard returns to audio mode at the end
of the call.
39
MT SB 01
Publicité
