Comelit Simplebus MT SB 01 Manuel Technique page 35

• MANUAL DAY/NIGHT SWITCHING
To switch manually between DAY and NIGHT, press key
The current mode is shown on the display.
✴
ATTENTION: press key to disable automatic DAY/NIGHT mode switching.
• MANAGING A CALL MADE FROM AN EXTERNAL UNIT WITHOUT TRANSFER
OPERATION
Starting condition:
the system is in DAY mode
EXAMPLE: A call from an external unit addressed to internal extension 002 arrives.
Lift the receiver.
The switchboard hangs up.
Or
the conversation time ends (MAX 3 minutes).
OPERATION
Starting condition:
the system is in NIGHT mode
EXAMPLE: A call arrives addressed to the switchboard (CODE=240).
Lift the receiver.
The switchboard hangs up.
Or
the conversation time ends (MAX 3 minutes).
All manuals and user guides at all-guides.com
✴
(see Figure 1 key 13, page 3).
DAY MODE
DISPLAY
A (----) 21:40
WED 12/03/07
CALL FOR
USER 002
COMMUNICATING
TO EXTERNAL UNIT
A (----) 21:40
WED 12/03/07
NIGHT MODE:
DISPLAY
A NIGHT 21:40
WED 12/03/07
CALL FOR
SWITCHBOARD
COMMUNICATING
TO EXTERNAL UNIT
A NIGHT 21:40
WED 12/03/07
MT SB 01
DESCRIPTION
The switchboard rings.
If there is a name in the directory under code
002, that name is displayed.
The CH-CH contact is closed for 1 sec.
The switchboard communicates with the
external unit.
The conversation is ended.
DESCRIPTION
The switchboard rings.
The CH-CH contact is closed for 1 sec.
The switchboard communicates with the
external unit.
The conversation is ended.
33 MT SB 01