Publicité
Les langues disponibles
Les langues disponibles
6
m. Reassemble the Left Motor Cover, making sure there
are no wires pinched at any point during reassembly.
n.
Reinstall the four right Motor Cover screws removed
from the Right Motor Assembly.
o.
Remove the Fuse and Fuse Cap from the old Power
Cord and assemble it onto the new Quick Release
Disconnect Plug.
Fuse Cap
TALON WIRING DIAGRAM
Talon Motor
Black M-
Red M+
minnkotamotors.com
Part #2374956
Fuse
Green
Red
Black
Green
Black M-
Red
M+
Red M+
White B+
Power Cord
Minn Kota Consumer & Technical Service
Johnson Outdoors Marine Electronics, Inc.
PO Box 8129
Mankato, MN 56001
ECN 40714
Left Motor
Left Motor
Cover
Cover
Screws
Screws
B-
Black
B+
Black
M-
White
Black B-
Fuse
Assembly
White B+
White B+
Black B-
Green
Ignition
Switch
(if installed)
Starting Battery
Green
121 Power Drive
Mankato, MN 56001
Phone (800) 227-6433
Fax (800) 527-4464
Plastite
Plastite
Screws
Screws
Plastite
Plastite
Right Motor
Right Motor
Screws
Screws
NOTICE:
When installation of the
Quick Connect Plug is complete,
the Fuse side of the Plug can be
reconnected to the battery. The
connection between the two halves
can be connected and disconnected
when power should be restored or
removed from the battery.
©2020 Johnson Outdoors Marine Electronics, Inc.
All rights reserved.
Rev C
Cover
Cover
06/20
Publicité
