Transcend 365 miniCPAP Auto Guide Rapide page 5

Transcend 365 miniCPAP Auto Quick Guide
Assembling the Transcend 365 miniCPAP Auto
Device
Your mask connects directly to the Transcend 365 miniCPAP Auto via the air supply tube.
Follow these steps to assemble the Transcend 365 miniCPAP Auto:
Connect your mask (sold separately) to an air supply tube with a standard 22 mm
1.
connector (sold separately).
Connect the air supply tube directly to the Transcend 365 miniCPAP Auto device,
2.
making sure it is fully seated.
Plug the power supply into the Transcend 365 miniCPAP Auto. Place device on a
3.
flat, stable surface.
Connect the appropriate power cord to the power supply and connect the power
4.
cord to a wall outlet.
Setting up the Transcend 365 miniCPAP Auto
Home Screen
When supplied with power, you will see
the LCD Home screen.
Center-Power, 'Select' button,
Home, and Therapy Mode
Up- Settings
Down- Humidification, Ramp Activation
Left/Back- Compliance Report
Right- Last Session Report
The top right white numbers on the Home screen show the set pressure (large number)
and the minimum and maximum pressures (small, lighter numbers - 4 and 20 in this
image).
All manuals and user guides at all-guides.com
Page 5