Transcend 365 miniCPAP Auto Guide Rapide page 11

Transcend 365 miniCPAP Auto Quick Guide
Humidifier LCD indicators in Standby
Mode
Water Status Indicators
These indicators will only be displayed if the humidifier is set to a level > 0. They will
appear in lower right portion of the Home Screen
Flashing Blue Droplet - Out of Water
Indicated by a flashing blue droplet. Humidifier will be disabled during therapy. Can be
caused by:
 No water in the reservoir – only displayed if heater/humidifier is set to level > 0.
 If this status appears but there is water in the reservoir, it indicates an error likely
due to moisture in the CPAP. Allowing the system to dry out may correct the issue.
To do this, run the CPAP in Dry Mode.
Note: After drying the system, disconnect and reconnect the power source to ensure the
status is reset.
All manuals and user guides at all-guides.com
Page 11
Flashing blue droplet