Télécharger Imprimer la page

BRÖTJE HEIZUNG NEOP 300 Notice De Montage page 18

Masquer les pouces Voir aussi pour HEIZUNG NEOP 300:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
en
1 Safety
1
Safety
1.1
General safety instructions
1.2
Recommendations
1.3
Liabilities
18
Danger of electric shock
Danger to life through incorrect work!
All electrical work in connection with the installation may only be
carried out by a trained electrician.
Caution
There is a risk of significant material damage when installing the
accessories. Accessories must therefore only be installed by
trained contractors and commissioned by a competent person
appointed by the system installer. Accessories used must
correspond to the technical regulations and be approved by the
manufacturer in combination with these accessories.
Caution
Only genuine spare parts may be used.
Danger
Risk of death due to modifications to the accessories!
Unauthorised conversions and modifications to the accessories
are not permitted, as these can put people at risk and cause
damage to the accessories. Failure to comply with these
instructions renders the approval for the accessories void.
The neutralisation unit NEOP 300 is used for neutralisation of condense
water (raising the pH value over 6.5) from gas condensing boilers with an
output of up to 300 kW.
See
The installation manual of the gas condensing boiler used must be
followed.
1.3.1
Manufacturer's liability
Our products are manufactured in compliance with the requirements of the
various Directives applicable. They are therefore delivered with the
marking and any documents necessary. In the interests of the quality of
our products, we strive constantly to improve them. We therefore reserve
the right to modify the specifications given in this document.
Our liability as manufacturer may not be invoked in the following cases:
Failure to abide by the instructions on installing and maintaining the
appliance.
Failure to abide by the instructions on using the appliance.
Faulty or insufficient maintenance of the appliance.
1.3.2
Installer's liability
The installer is responsible for the installation and initial commissioning of
the appliance. The installer must observe the following instructions:
Read and follow the instructions given in the manuals provided with the
appliance.
Install the appliance in compliance with prevailing legislation and
standards.
Carry out initial commissioning and any checks necessary.
7311618 - 05 - 11122020

Publicité

loading