Publicité
Les langues disponibles
Les langues disponibles
Type 2: Sliding Window Installation
Foam seal B
(shorter adhesive type)
Foam seal A
(adhesive type)
Cut the adhesive foam seal
A and B strips to the proper
lengths and attach them to
the window sash and frame
as shown.
Security
bracket
2 screws
If desired, install the
security bracket with
2 screws as shown.
Note: To ensure proper function, DO NOT overextend or bend the hose.
Make sure that there is no obstacle around the air outlet of the exhaust
hose (in the range of 500 mm) to ensure that the exhaust system works
properly. All the illustrations in this manual are for explanation purposes
only. Your air conditioner may be slightly different. The actual shape shall
prevail.
Installation
Window slider B
(if required)
Window slider A
Insert the window slider
assembly into the window
opening.
Insert the window slider
adaptor into the hole of
the window slider.
15
Foam seal C
(non-adhesive type)
Cut the non-adhesive foam
seal C strip to match the
window height. Insert the
foam seal between the glass
and the window frame to
prevent air and insects from
getting into the room.
Publicité
