Publicité
Les langues disponibles
Les langues disponibles
10
USING THE G26000
CHARGE MODES continued
The 13.6V SUPPLY, 16V BOOST, 32V BOOST and 12V CALCIUM charge
modes are highly specialized charging modes and should be used with
CAUTION. It is extremely important you read and understand these charge
modes before using. The 13.6V SUPPLY, 16V BOOST and 12V CALCIUM
modes are for 12V LEAD-ACID BATTERIES ONLY. The 32V BOOST mode is
for 24V LEAD ACID BATTERIES ONLY. These charge modes are explained
below:
MODE
EXPLANATION
The 13.6V SUPPLY mode is used for low voltage
13.6V SUPPLY
batteries, maintenance charging, or as a power
13.6V
supply. The 13.6V SUPPLY provides a constant
14-230Ah
voltage of 13.6V at 5A (5000mA). For low voltage
5A (5000mA)
batteries, the 13.6V SUPPLY mode will increase the
Red LED
battery voltage (regardless of the starting voltage) to a
point where the battery charger can perform a normal
charge cycle. For help with low voltage batteries, see
the section entitled "Troubleshooting."
For maintenance charging, the 13.6V SUPPLY mode
will provide a "float" charge for larger capacity
batteries. As a power supply (hence, SUPPLY),
the 13.6V SUPPLY mode can be used to power
equipment that requires 13.6V at 5A (5000mA).
This mode has an overload protection feature at 6A
(6000mA) max. The 13.6V SUPPLY mode can also be
used as a Power Supply to act as a battery when
changing or replacing a battery. When selected,
a Red LED will illuminate. FOR USE WITH 12V
BATTERIES ONLY.
CHARGE MODES continued
MODE
EXPLANATION
The 16V BOOST mode is used to recover battery
16V BOOST
capacity from a stratified (sulfated) battery by
16.5V
applying a specialized high 16.5V (17V Max) voltage
14-230Ah
to soften and melt down sulfate from the battery
1.5A (1500mA)
plates so that the material becomes usable again.
Red LED
When selected, a Red LED will illuminate. FOR USE
WITH 12V BATTERIES ONLY.
The 32V BOOST mode is used to recover battery
32V BOOST
capacity from a stratified (sulfated) battery by
33V
applying a specialized high 33V (34V Max) voltage to
14-230Ah
soften and melt down sulfate from the battery plates
1.5A (1500mA)
so that the material becomes usable again. When
Red LED
selected, a Red LED will illuminate. FOR USE WITH
24V BATTERIES ONLY.
The CALCIUM mode is for charging 12V calcium (also
12V CALCIUM
known as calcium-calcium) lead-acid batteries. THIS
16.5V
MODE IS NOT TO BE USED WITH LEAD-CALCIUM
25-100Ah
BATTERIES. FOR USE WITH 12V BATTERIES
5A (5000mA)
ONLY.
Red LED
WICKED SMART TIP
Amp Hour (Ah) is a rating that measures a battery's storage capacity.
The Ah rating indicates how much amperage is available in the battery
over a twenty (20) hour period. In order to determine how many
constant Amps the battery can output for 20 hours, divide the Ah rating
by 20. For example, if you have a 100Ah battery, it can deliver 5 Amps
for 20 hours before it is fully discharged (100 / 20 = 5).
Now That's Smart, Wicked Smart.™
USING THE G26000
G26000
geniuschargers.com
11
Publicité
