Transport Of The Appliance; Installation Preparation; Special Installation Steps - Gaggenau RY 492 Instructions D'installation

3.

Transport of the appliance

ã
WARNING
Be careful, otherwise people who are helping may
be injured or the appliance may be damaged.
The appliance is very heavy.
1
The appliance is 83 /
8
cannot be transported in an upright position,
the appliance can be transported horizontally.
Note:
Do not raise up the appliance via the side panels.
Risk of damage to the appliance!
When raising up the appliance, observe the required
minimum height at the installation location according to
the following table:
Raise up via
appliance rear
Minimum height
86"/2185 mm
Note:
Never push the appliance dolly in from the front under
the appliance. Risk of damage to the appliance.
!
1. Transport the appliance with an aid to transport
which is suitable (sack barrow, trolley or
wheelbarrow).
2. When transporting, secure the appliance from being
tilted.
" (2126 mm) tall. If the appliance
Do not raise up from
appliance side
Do not raise up the
appliance via the side
panels!
4.

Installation preparation

Unpack installation materials and accessories.
To simplify installation, the packages are identified with
labels A, B, C and D corresponding with the manual
sections.
5.

Special installation steps

The following symbol indicates that additional steps
need to be taken before proceeding to the next chapter.
Special installation steps are described after section D.
– Water connection see "Preparing the
water connection" and „Connecting
the appliance to the water supply".
– Door opening angle see "Setting the
door opening angle
(refrigerator compartment)".
11