Proxxon FET Manuel D'utilisation page 17

Translation of the Original Operating Instructions
Contents:
1. In general
2. Safety guidelines
2.1 Specific safety regulations for circular
saw benches
2.2 Safety guidelines regarding protective covers
2.3 Safety guidelines for sawing process
2.4 Kickback – Causes and corresponding safety
guidelines
2.5 Safety guidelines for operating table saws
3. Description of machine
4. Legend (fig. 1)
5. Technical data
6. Setting up the saw
6.1. Unpacking
6.2. Swinging open the upper housing part
6.3. Fastening the saw
6.4. Saw blade guard
6.4.1. Secure the saw blade guard with
the splitting wedge
7. Settings
7.1. Height adjustment of the saw blade
7.2. Adjusting the saw blade tilt
8. Extendable saw table
9. Dust suction
10. Working with the limit stops
10.1. Working with the longitudinal stop
10.2. Working with the angle stop
10.3. Auxiliary stop
11. Sawing
11.1. General tips on sawing
12. Changing the saw blade
12.1. Choosing the right saw blade
13. Maintenance and repairs:
13.1. Cleaning the housing
13.2. Cleaning the inside of the device
13.3. Replacing the toothed belt
14. Disposal
15. CE Declaration
All manuals and user guides at all-guides.com
1. In general
Dear Customer!
17
17
The use of these instructions
17 • makes it easier to become acquainted with the device,
• prevents malfunctions due to improper handling, and
18
• increases the service life of your device.
18
Always keep these instructions close to hand.
19
Only operate this device with exact knowledge of it and comply
19 with the instructions.
20
PROXXON will not be liable for the safe function of the device for:
20
20
• handling that does not comply with the usual intended use,
21 • other application uses that are not stated in the instructions,
• disregard of the safety regulations.
21
21
You will not have any warranty claims for:
21
• operating errors,
22 • lack of maintenance.
For your safety, please comply with the safety regulations at all
22
costs.
22
Only use original PROXXON spare parts.
22
All rights reserved for further developments within the meaning of
22 technical progress. We wish you much success with the device.
22
WARNING!
22
Read all safety warnings and instructions. Failure
23
to follow all safety warnings and instructions listed
23 below may result in electric shock, fire and/or serious injury.
KEEP ALL SAFETY WARNINGS AND INSTRUCTIONS FOR
23
THE FUTURE!
23
23
24
2. Safety guidelines
24
24
2.1 Specific safety regulations for circular saw benches
24
• Do not use deformed or flawed saw blades.
25
• Replace worn bench inserts.
25
• Use only the saw blades recommended by Proxxon. Utilised
25
25
• Make sure the saw blade is suitable for the material to be
25
• Wear hearing protection!
• The sawdust from certain materials can be hazardous to
• Wear gloves when handling saw blades and rough materi-
• Only operate the saw with a dust suction device! Your saw
• For smaller work pieces, use a push-rod for the feed!
• Never work with a device that has faulty or defective parts.
saw blades must comply with EN 847-1. The saw-cut may
not be smaller than the thickness of the splitting wedge.
sawn.
your health. Therefore, wear a respirator.
als!
has a connecting piece at the back for this purpose. You can
connect a vacuum cleaner here.
Your circular saw might no longer be safe. Therefore, have
any damage immediately repaired by the Proxxon Customer
Service!
GB
17