Publicité
Les langues disponibles
Les langues disponibles
Using the Manual Controls
The Manual Controls include:
Low
Med
High
Pulse
Stop
Use these controls for personal recipes or to continue blending after a
Programmed Setting is finished.
1. P ress the (
) power button to turn the product on. The power light will
blink, meaning the product is active and ready to use. The light will stay on
when the motor is running.
2. Put the ingredients into the jar.
3. Secure the lid and the filler cap.
Using High
1. Press the "High" button to run the product at a high speed.
2. Press the "Stop" button to cancel the operation at any time.
3. Press the (
) power button to turn the product off.
Using the Medium
1. Press the "Medium" button to run the product at a medium speed.
2. Press the "Stop" button to cancel the program at any time.
3. Press the (
) power button to turn the product off.
Using the Low
1. Press the "Low" button to run the product at a low speed.
2. Press the "Stop" button to cancel the program at any time.
3. Press the (
) power button to turn the product off.
Using the Pulse
1. Verify that the blue light is blinking. This indicates that the blender is turned on.
2. Press and release the "Pulse" button.
3. Release the pulse button to stop.
4. Press the (
) power button to turn the product off.
Use pulse button to crush ice or chop food.
French_BLSTMB Series_16EFM1.indd 8-9
All manuals and user guides at all-guides.com
8
Caring for Your Product
After Use
1. P ress the (
) power button to turn the unit off and unplug blender. Lift the
jar straight up from the base, remove the lid and empty the jar.
2. I f necessary, use a rubber spatula to scrape foods away from the sides of the jar.
Cleaning
CAUTION: Blades are sharp. Handle carefully.
Carefully release the blade from the bottom of the jar by turning the threaded
jar bottom counterclockwise. The jar lid, filler cap and blade are dishwasher
safe. Use the top rack of the dishwasher for the jar lid, filler cap, and blade. Place
sealing ring into bottom basket of dishwasher.
You can also wash the parts in warm, soapy water. Rinse well and dry. Wipe
the base with a soft, damp cloth to clean. Never submerge the blender base in a
liquid.
Check the parts as you put them back together.
TIP: Run blender with soapy water for 20-30 seconds
at Low or Medium Speed for cleaning without
disassembly. Follow with clean water rinse.
Storing
Reassemble the blender for storage. Leave the lid open a
gap so no odors are retained.
NOTICE: Never put the jar, or any other parts, in a microwave oven. Never store
foods or drinks in the jar.
Servicing
This appliance has no user serviceable parts. Any service beyond the cleaning
described in the Cleaning section should be performed by an authorized service
facility only. If repairs or replacement parts are needed, contact Oster toll free at
1-800-667-8623 or visit www.oster.ca.
9
2/15/16 9:05 AM
Publicité
