Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Using the receiver
Switching the receiver on/off
The receiver can only be switched off when the standard display is shown on
the display panel. When in the operating menu, briefly pressing the
button will cancel your entry (ESC function) and return you to the standard
display with the last stored settings.
Press the
ON
button
To switch the receiver off, press the
display.
Connecting the headphones/adjusting the volume
To monitor the audio signal, connect headphones with a ¼" (6.3 mm) jack
plug to the headphone output (PHONES)
Attention! High volume!
Even short exposure to high volume levels will damage your hearing!
Set the volume for the connected headphones to the minimum before
putting the headphones on.
First, set the volume control
left as far as possible. Then gradually turn up the volume.
Volume up? – NO!
When people use headphones, they tend to choose a higher volume than
with loudspeakers. Listening at high volume levels for long periods can
lead to permanent hearing defects. Please protect your hearing,
Sennheiser headphones have an excellent sound quality even at low
volumes.
Activating/deactivating the lock mode
The receiver has a lock mode that can be activated or deactivated via the
operating menu (see "Activating/deactivating the lock mode" on page 24).
The lock mode prevents that the receiver is accidentally programmed or
switched off during operation.
to switch the receiver on.
ON
button until "OFF" appears on the
.
to the lowest volume by turning it to the
ON
13
Publicité
