Grundig WTR 3200 BT DAB plus WEB Manuel D'instructions page 8

POWER­SUPPLY
Mains­operation
Check that the mains voltage on the type plate
(on the back of the device) corresponds to your
local mains supply. If this is not the case, contact
your specialist dealer.
1 Plug the mains cable supplied into the »AC«
socket on the device.
2
Plug the mains cable into the socket (230 V ~ ,
50/60 Hz).
Caution:
The device is connected to the mains with
7
the power cable. Pull out the power cable
when you want to completely disconnect the
device from the mains.
8­ ­ ENGLISH
All manuals and user guides at all-guides.com
­----------------------------------------------------------------------------------------------------------------
Unplug the mains plug to disconnect the de-
vice from the mains. Make sure the power
plug is easily accessible during operation
and not hindered by other objects.
The mains plug or appliance coupler is used
7
as disconnect device, the disconnect device
shall remain readily operable.