Use; Adjusting The Ventilation Flow Rate; Choosing The Comfort Mode - aldes Cube 300 Notice De Montage

6. USE

The user keypad can be used to change 2 parameters:
Ventilation
flow rate
Comfort
mode

6.1 Adjusting the ventilation flow rate

1 . Away mode (speed 1): to be used when away from the house for long periods (holidays) - not timed .
The away mode reduces the ventilation flow rate to keep it at minimum level .
2 . Nominal flow rate (speed 2): default ventilation flow rate - not timed .
Auto
3 . Increased flow rate (speed 3): increases the flow rate to the setted value - no timer .
Hygro
4 . BOOST flow rate (speed 4): increases the flow rate to the setted value - no timer .
0 1 2 3 4

6.2 Choosing the comfort mode

Type SDB WC
1 . Automatic Mode . The Heat Recovery unit is optimised thanks to the heat exchanger summer by-pass
Logement
to keep the house warm in winter and cool in summer .
2 . Heating mode: the unit supplies warm air into the house, both in summer or winter .
3 . Cooling mode: the unit supplies cool air into the house, both in summer or winter .
5/6/7
Cellier
Auto
Hygro
0 1 2 3 4
Type SDB WC Cellier
Logement
43
5/6/7