Trix H0 BR 110.3 Manuel D'instructions page 7

Safety Notes
• This locomotive is to be used only with an operating
system designed for it.
• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This locomotive must never be supplied with power from
more than one power pack.
• Pay close attention to the safety notes in the instructions
for your operating system.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.
• The feeder track must be equipped to prevent inter-
ference with radio and television reception, when the
locomotive is to be run in conventional operation. The
611 655 interference suppression set is to be used for this
purpose. The interference suppression set is not suitable
for digital operation.
• WARNING! Sharp edges and points required for operation.
General Notes
• The operating instructions and the packaging are a com-
ponent part of the product and must therefore be kept as
well as transferred along with the product to others.
• Please see your authorized Trix dealer for repairs or
spare parts.
• The warranty card included with this product specifies
the warranty conditions.
• http://www.maerklin.com/en/imprint.html
All manuals and user guides at all-guides.com
Functions
• This model is designed for operation with H0 2-rail
• Analog 14 volts DC, digital 22 volts AC.
• This locomotive comes equipped with a Trix
• Trix motor vehicles must not be operated on digital
DC systems (track according to NEM standards) with
conventional DC power packs.
connector for digital operation and can have
the Märklin locomotive decoder 60942/60947
installed in it.
systems without an built-in engine decoder (Motor can
be damaged!).
7