Publicité
Les langues disponibles
Les langues disponibles
Indicators on the display panel
D.C.A.C.
Lights up when the measurement results of the
Auto Calibration (D.C.A.C. IX) function are
applied.
360SSM
Lights up when the 360 Spatial Sound Mapping
function is activated (page 47).
A.P.M.
Lights up when the A.P.M.
(Automatic Phase Matching) function is
activated. You can only set the A.P.M. function
in the D.C.A.C. function.
D.R.C.
Lights up when dynamic range compression is
activated.
EQ
Lights up when the equalizer is activated.
BLUETOOTH indicator
"BT" lights up when a BLUETOOTH device is
connected. Flashes while connecting.
"BT TX" lights up when [Bluetooth Mode] is set
to [Transmitter].
ZONE2
Lights up when the power for Zone 2 is on.
ST
Lights up when the receiver tunes to a FM
stereo broadcast.
HDMI OUT A + B
Indicates the HDMI OUT jacks that currently
output the audio/video signals.
Speaker system indicator (page 43)
ZONE3
Lights up when the power for Zone 3 is on.
Neural:X
Lights up when DTS Neural:X decoding is
activated.
DSur
Lights up when Dolby Surround decoding is
activated.
Note
These indicators may not light up depending
on the speaker pattern setting.
DSD Native
Lights up when the DSD Native function is
activated.
IN-CEILING
Lights up when the In-Ceiling Speaker Mode is
activated.
NETWORK
Lights up when the receiver is connected to
wireless LAN or wired LAN.
UPDATE
Lights up when new software is available for
download.
Input indicator
Lights up to indicate the current input signals to
the receiver.
HDMI
Digital signals are input through the selected
HDMI IN jack.
eARC (ARC)
"eARC" lights up when eARC signals are input
through the HDMI OUT A (TV) jack, and "ARC" for
ARC signals.
COAX
Digital signals are input through the
COAXIAL IN SA-CD/CD jack.
OPT
Digital signals are input through the
OPTICAL IN TV jack.
9
EN
Publicité
