Sony STR-AN1000 Mode D'emploi page 18

Speaker configuration and speaker pattern settings
This receiver allows you to connect up to a 7.1-channel system.
The table below shows examples of speaker configurations and speaker pattern settings. For
details on connections, see page 19 to 24.
Speaker configuration in each zone
Main zone
5.1-channel
7.1-channel using
surround back speakers
5.1.2-channel using top
middle speakers
5.1.2-channel using
Dolby Atmos enabled
speakers
5.1-channel with Zone 3
speakers
5.1-channel with Bi-
Amplifier connection
* You can only set [Surround Back Speaker Assign] if the speaker pattern is set to a setting that does not have
surround back and height speakers.
Tip
• This receiver allows you to connect Sony wireless rear speakers and a Sony subwoofer (page 26).
• When your Sony TV has the S-CENTER SPEAKER IN jack, you can output the center part of the receiver sound
from the TV speaker (page 30).
• By setting [SpeakerRelocation/PhantomSurroundBack] to [Type A] or [Type B] in the [Audio Settings]
menu, you can enjoy a surround effect equivalent to up to 7.1.2 channels in terms of hearing. When you set
[SpeakerRelocation/PhantomSurroundBack], perform Auto Calibration in advance (page 43).
18
EN
[Surround Back
Speaker Assign]*
Zone 3
Not used
Not used
Not used
Not used
2-channel [Zone3]
Not used [BI-AMP]
[Speaker Pattern]
setting
— [5.1]
— [7.1]
— [5.1.2 (TM)]
— [5.1.2 (FD)]
[5.1]
[5.1]
For connection,
see page
19
20
21
22
23
24