After Use Storage - Bosch AQUATAK 1200 PLUS Instructions D'emploi

F016 L70 373 - GB Seite 5 Freitag, 21. Oktober 2005 11:10 11
Cleaning/inspecting the strainer
Expose the strainer 14 in the machine water inlet
L
connection by removing the inlet connector 7.
Rinse and replace. If damaged replace.
Never use the pressure washer without the strainer
or a damaged strainer.
Transport
To move the machine use the top handle and roll the
machine on the wheels.
To transport the unit up or down steps or over obsta-
cles, it must be lifted by the top handle.
AQUATAK 1250
If the unit is to be stored or transported horizontally
the detergent tank should be drained first.
17 • F016 L70 373 • TMS • 14.09.05

After use storage

Clean the exterior of the machine thoroughly using a
soft brush or cloth. Do not use water, solvents or pol-
ishes. Remove all debris, especially from the venti-
lation slots.
Frost will damage a pressure washer that has not
been completely emptied of water. The machine
should be stored in a frost free room.
Do not place other objects on top of the machine.
Ensure cables are not trapped when storing. Do not
kink high pressure hose.
English - 5