Aqua Medic Turboflotor 5000 Shorty Compact Mode D'emploi page 14

All manuals and user guides at all-guides.com
1. Features
The Ocean Runner PH series of magnetically coupled power head pumps are very quiet in
operation. They have fully encapsulated synchronous motors and can operate completely safely
either submerged or out of water. The polished ceramic shaft and bearing is practically wear
resistant, ensuring a long operating life. The pumps can easily be taken apart for cleaning.
All materials are salt water resistant.
IMPORTANT NOTE:
Only operate the pump at the voltage shown on the product label.
2. Table 1: Technical Data
Model Ocean Runner Ocean Runner Ocean Runner
PH 2000 PH 2500 PH 3000
Line voltage: 230 V~/50 Hz 230 V~/50 Hz 230 V~/50 Hz
Power consumption: 19 watts 37 watts 43 watts
Maximum flow: 2,000 l/h (33 l/min.) 2,500 l/h (40 l/min.) 3,000 l/h (50 l/min.)
Maximum head: 1.5 m (5.0 ft) 2.6 m (8.6 ft) 1.6 m (5.3 ft)
Hose connection: ½" ½" ½"
Cable length: 2.8 m (9 ft) 2.8 m (9 ft) 2.8 m (9 ft)
Protection rating: IP68 IP68 IP68
Max. depth: 1 m (3 ft) 1 m (3 ft) 1 m (3 ft)
Max. water 35°C 35°C 35°C
temperature:
3 . Connections
Suction side: The suction side may be connected with flexible hose, using the hose fitting (2)
included. If the pump is used as a current pump submerged in the aquarium, the filter basket (12,
15) and the sponge (10) have to be used.
Pressure side: The pressure side can be connected with a flexible hose, using the hose fitting (2)
included. This hose fitting must also be fitted if the pump is used as a pure current pump.
If the pump is used as return pump, it can be directly connected to PVC (25 mm, 1") pipe by using
an optional threaded connector.
14