Publicité
Les langues disponibles
Les langues disponibles
SAFETY PRECAUTIONS
PROTECT AGAINST DEW FORMATION
In extremely cold regions, if the unit is moved quickly from
an extremely cold place to warmer one, dew is likely to be
formed. If dew is formed, printing is not possible.
OPERATING AMBIENT TEMPERATURE RANGE
The operating ambient temperature range is 15°C - 35°C
(59°F - 95°F) and the humidity of 30% - 80% RH. When
using the unit on the system rack, be sure to keep this
ambient temperature inside the rack.
When the printer is used in a low temperature, it may take
some time to start printing.
40 cm
Top view
UNSUITABLE MATERIALS FOR THE THERMAL
PHOTO PRINTER
Coat flaking and deformation are likely to occur if the unit is
wiped with chemical dusters, benzine, thinner or any other
solvent, if rubber or PVC items are left in contact with the unit
for extended duration, or if the unit is sprayed with insecticide.
CARE OF THE CABINET
Unplug and clean with a soft cloth slightly moistened with a mild
soap and water solution. Allow to dry completely before operating.
Never use petroleum base solutions or abrasive cleaners.
HEAD ABRASION
The thermal head, like the video head, wears out. When it
is abraded, it becomes hard to print out fine details of the
•
Do not pull out nor touch the print paper until printing is
completed. It may degrade the print quality or cause an
error.
•
Dust or other foreign matter adhering to the print paper
or the ink cassette, or deformation resulting from
exposure to extremely low or high temperatures could
cause loss of color, uneven color or lines, or wrinkles in
the print images.
•
Depending on the internal temperature, the printer may
stop printing temporarily during printing. (The POWER
indicator blinks green.) Please wait for the printer to
resume printing.
Do not touch the print paper.
•
When using 152x203 mm (6x8") or 127x178 mm (5x7")
size paper, remove the supplied paper tray specially
designed for 89x127 mm (3.5x5") and 102x152 mm
(4x6") size paper. Also, make sure to remove the print
papers each time printing is completed. Otherwise, a
paper jam may occur.
All manuals and user guides at all-guides.com
10 cm
10 cm
15 cm
10 cm
FOR LONG OPERATING LIFE
OTHER CAUTIONS
MAINTAIN GOOD VENTILATION
Ventilation slots and holes are provided on the rear and both
sides of this unit. Place the unit on a hard and level surface and
keep a space between the unit and the walls to ensure proper
ventilation. However, take care that a wind does not directly
blow into the front of the unit (print outlet). When putting the
unit on the system rack, take a space between the unit and the
back and sides of the rack.
Secure a minimum space described below.
7 cm
Side view
picture. In such a case, it is necessary to replace the thermal
head. Consult with the sales dealer for replacing the head.
CONNECTING DEVICES
Read thoroughly "Operating Precautions" of the instruction
booklets for the devices connected with the Thermal Photo
Printer. The power cord must be disconnected after printing is
over.
CAUTION ON RELOCATING
When transporting this unit, make sure it is not likely to be
subjected to impacts. They can be a prime cause for damage.
Further, make sure to disconnect the power cord from the
power outlet, and the cables from the connected devices.
•
Empty the paper strip bin whenever you pull out the
printing unit for the purpose such as replacing the print
paper or ink ribon to prevent jamming the strips at the
print outlet.
•
The paper tray is specially designed for 89x127 mm
(3.5x5") and 102x152 mm (4x6") size prints. Do not use
the tray when printing on 152x203 mm (6x8") or 127x178
mm (5x7") size paper. It may cause a paper jam.
•
The paper tray is used for storing the cut print paper
temporarily. The print paper may fall from the tray or may
not be stored in the printed order.
NOTE:
YOUR UNDERSTANDING IS REQUESTED FOR THE
LOSS OF IMAGES IN MEMORY DUE TO THE SUDDEN
OCCURRENCE OF A MALFUNCTION.
12
7 cm
15 cm
Side view (double stack)
Publicité
