Mio Sport SD Manuel D'instructions page 4

01. ACtivAting Your Mio
1. Remove your MIO from the packaging and peel off the protective film
on the display.
2. Press and hold the stArt button (the upper right button) to wake up
the watch. The display will be switched on.
02. QuiCk stArt
To get started, your MIO will ask you to set several parameters.
» Press + or – to increase and decrease the values
» Holding + or – will rapidly change the values
» Press set to confirm the value and move to the next parameter
For detailed information on setting up your MIO, please see Section 14.
MiO Tip: Locking the heart rate sensor will prevent unwanted heart rate
readings while setting up the watch. See Section 8 for more information.
TiME
» Hour (12 hour format)
» Minute
» Second (whenever + or – is pressed the second will be reset to zero)
» Hour format (12 hour or 24 hour format)
1 English