Mio Sport SD Manuel D'instructions page 10

07. tAking Your HeArt rAte
7 English
1. Place any finger or your
palm anywhere on the
Smart Touch sensor.
2. Hold to activate Smart Touch
sensor. Make sure the back
plate is in contact with
your wrist. Heart icon and
'TeSTING' will flash.
3. Wait for eKG-accurate heart rate
readout (3 – 8 seconds). MIO will beep
when the reading is ready. Your heart
rate and % of max heart rate will remain
displayed for 5 seconds after you
remove you finger from the sensor.