Vetus WSR160 Manuel page 27

Connections
Run the cables from the rotor/vane-unit to the
meter. Connect this cables as shown in the dia-
gram.
N.B. The white wire from the rotor/vane-unit is
not used!
If you need to cut and rejoin the cable be sure
to connect colour to colour.
The unit needs a power supply of 12 Volt DC, 75
mAmp. Connect this power supply to the meter
as shown in the diagram. A suitable mains
adaptor (220 Volt / 12 Volt - 300 mA) can be
supplied by Vetus.
20
10.0305
All manuals and user guides at all-guides.com
1 Meter
2 Rotor/vane-unit
3 Mains adaptor
Wiring colour code
1 Red
2 Blue
3 Yellow
4 Green
5 Black
WSR160